Difference between revisions of "OpenVPN Windows Vista/7/8"

Setup Instructions for Windows Vista/7/8/10 for OpenVPN version 2.4 (older version 2.3 here)

1. Download the OpenVPN Installation Program
Click here to download.

OpenVPN Official Download Page

2. Double-click OpenVPN-2.5.8-I604-amd64.msi to install.
HIT NEXT, CONTINUE, AND CONFIRM ALL STAGES OF INSTALLATION

3. Download the OpenVPN BTGuard Configuration executable file.(ZIP).

4. Open openvpn_auto_config.exe.

5. Click on Ok.

6. Go to C:\Program Files\OpenVPN\Config
If non-existant then go to C:\Program Files (x86)\OpenVPN\Config

You should have the following files in the Config folder.

If the Self-Extractor didn't work, download the ZIP file and move those files manually.

If it won't allow you to unzip the files directly in the Config folder, try extracting them to the desktop then moving them to the folder

How To Connect

1. On the Desktop, double-click OpenVPN GUI to start.

2. RIGHT CLICK the OpenVPN icon in the Windows system tray, select which server you'd like to connect to and hit Connect

If BTGuard (Fastest) doesn't work, please try BTGuard (TCP). All Config files use the UDP protocol except BTGuard (TCP).

3. Enter your BTGuard username & password and hit OK
Checkmark Save password if you'd like.

Both username and password are case sensitive. Make sure not to add/forget Capital Letters.

You are now connected!


Here is a list of all of our IP addresses:
109.201.133.205
109.201.133.206
104.254.90.82
104.254.90.83
104.254.90.84
104.254.90.85
104.254.90.86
104.254.90.87
104.254.92.226
104.254.92.227
104.254.92.228
104.254.92.229
104.254.92.230

If you visit Ip-lookup.net and see one of our IPs, everything is working correctly!

For qBittorrent Users!

We have noticed that some IP leaks can happen with qBittorrent while using a VPN.

To fix this we have 2 solutions.
-The first one is to use an older version of qBittorrent. Click here to download v3.3.16

-If you prefer to use the newest version, please apply these changes in the settings.


In qBittorrent, go to Tools - Options - Advanced and change the Network Interface from Any interface to the one OpenVPN is using.

Most likely it should be Local Area Connection but depending on your network setup on your computer it could be named differently.

To find the name, please follow the instructions below.

1. Hit the Windows Key + X then select Network Connections

2. On the Network Connections page, look under Advanced network settings and click on Change adapter options

3. Find the one that says TAP-Windows Adapter V9.
In this case it is called Local Area Connection but it could be named differently on your end.

This is the one you want to select in the qBittorrent settings.