Difference between revisions of "OpenVPN dd-wrt"
From BTGuard Wiki
| Line 9: | Line 9: | ||
== Setup Instructions == | == Setup Instructions == | ||
1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/ <br/> | 1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/ <br/> | ||
| − | 2. Click on the Administration tab and then on Commands. <br/> | + | 2. Click on the '''Administration''' tab and then on '''Commands'''. <br/> |
| − | 3. Copy the whole content of the ddwrt_openvpn_btguard.txt file in the Command Shell. <br/> | + | 3. Copy the whole content of the ddwrt_openvpn_btguard.txt file in the '''Command Shell'''. <br/> |
| − | 4. Type in your username and password as shown on the left. <br/> | + | 4. Type in your '''username''' and '''password''' as shown on the left. <br/> |
| − | Both username and password are case sensitive. <br/> | + | ''Both username and password are case sensitive. <br/> |
| − | If UDP doesn't work, please type tcp instead of udp. <br/> | + | If UDP doesn't work, please type tcp instead of udp. <br/>'' |
</p> | </p> | ||
</div> | </div> | ||
Revision as of 21:08, 21 May 2013
Setup Instructions
1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/
2. Click on the Administration tab and then on Commands.
3. Copy the whole content of the ddwrt_openvpn_btguard.txt file in the Command Shell.
4. Type in your username and password as shown on the left.
Both username and password are case sensitive.
If UDP doesn't work, please type tcp instead of udp.
1. Click Start and select Control Panel
1. Click Start and select Control Panel
