OpenVPN dd-wrt

From BTGuard Wiki
Revision as of 23:39, 30 May 2013 by Support (Talk | contribs)

Jump to: navigation, search

PLEASE READ THROUGH THIS WHOLE ARTICLE! YOU RISK BREAKING YOUR ROUTER WHEN USING A CUSTOM FIRMWARE! PROCEED CAREFULLY AND MAKE SURE YOUR ROUTER IS COMPATIBLE! PLEASE READ THROUGH THIS WHOLE ARTICLE! YOU RISK BREAKING YOUR ROUTER WHEN USING A CUSTOM FIRMWARE! PROCEED CAREFULLY AND MAKE SURE YOUR ROUTER IS COMPATIBLE!


REQUIREMENTS

These instructions are ONLY for people who already have a dd-wrt compatible router flashed with the latest version.

In this tutorial, a DIR-825 rev. B2 was used. Firmware: DD-WRT v24-sp2 (05/27/13) std.

If you're having issues with OpenVPN, please try the PPTP method.

Openvpn_ddwrt_1.png

Setup Instructions

1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/
2. Click on the Administration tab and then on Commands.
3. Copy the whole content of the ddwrt_btguard.txt file in the Command Shell.
ZIP with both .txt files
4. Type in your username and password.
Both username and password are case sensitive.
If UDP doesn't work, please type tcp instead of udp.
5. Click on Save Startup.

Openvpn_ddwrt_2.png


6. Copy the whole content of the ddwrt_firewall.txt file in the Command Shell.
7. Click on Save Firewall