Difference between revisions of "OpenVPN dd-wrt"

From BTGuard Wiki
Jump to: navigation, search
Line 10: Line 10:
 
1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/ <br/>
 
1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/ <br/>
 
2. Click on the '''Administration''' tab and then on '''Commands'''. <br/>
 
2. Click on the '''Administration''' tab and then on '''Commands'''. <br/>
3. Copy the whole content of the ddwrt_btguard.txt file in the '''Command Shell'''. <br/>
+
3. Copy the whole content of the [ddwrt_btguard.txt ddwrt_btguard.txt] file in the '''Command Shell'''. <br/>
 
4. Type in your '''username''' and '''password'''. <br/>
 
4. Type in your '''username''' and '''password'''. <br/>
 
''Both username and password are case sensitive.'' <br/>
 
''Both username and password are case sensitive.'' <br/>
Line 27: Line 27:
 
  <div class="right">
 
  <div class="right">
 
   <p>
 
   <p>
<br/>6. Copy the whole content of the ddwrt_firewall.txt file in the '''Command Shell'''. <br/>
+
<br/>6. Copy the whole content of the [ddwrt_firewall.txt ddwrt_firewall.txt] file in the '''Command Shell'''. <br/>
 
7. Click on '''Save Firewall''' <br/>
 
7. Click on '''Save Firewall''' <br/>
 
   </p>
 
   </p>

Revision as of 04:46, 30 May 2013

Openvpn_ddwrt_1.png

Setup Instructions

1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/
2. Click on the Administration tab and then on Commands.
3. Copy the whole content of the [ddwrt_btguard.txt ddwrt_btguard.txt] file in the Command Shell.
4. Type in your username and password.
Both username and password are case sensitive.
If UDP doesn't work, please type tcp instead of udp.
5. Click on Save Startup.

Openvpn_ddwrt_2.png


6. Copy the whole content of the [ddwrt_firewall.txt ddwrt_firewall.txt] file in the Command Shell.
7. Click on Save Firewall

Openvpn_ddwrt_3.png

8. Your settings should look like this.
Please make sure your username and password are typed in correctly! Both are case sensitive.
9. Now click on the Management tab, go to the bottom of the page and click on Reboot Router.

Setup Complete!

The router will reboot and it will take it a minute or two to finish setting everything up.