OpenVPN dd-wrt

From BTGuard Wiki
Revision as of 23:49, 30 May 2013 by Support (Talk | contribs)

Jump to: navigation, search

PLEASE READ THROUGH THIS WHOLE ARTICLE! YOU RISK BREAKING YOUR ROUTER WHEN USING A CUSTOM FIRMWARE! PROCEED CAREFULLY AND MAKE SURE YOUR ROUTER IS COMPATIBLE! PLEASE READ THROUGH THIS WHOLE ARTICLE! YOU RISK BREAKING YOUR ROUTER WHEN USING A CUSTOM FIRMWARE! PROCEED CAREFULLY AND MAKE SURE YOUR ROUTER IS COMPATIBLE!


REQUIREMENTS

These instructions are ONLY for people who already have a dd-wrt compatible router flashed with the latest version.

In this tutorial, a DIR-825 rev. B2 was used. Firmware: DD-WRT v24-sp2 (05/27/13) std.

If you're having issues with OpenVPN, please try the PPTP method.

Openvpn_ddwrt_1.png

Setup Instructions

1. Connect and Log into your router by going to http://192.168.1.1/ or http://192.168.0.1/
2. Click on the Administration tab and then on Commands.
3. Copy the whole content of the ddwrt_btguard.txt file in the Command Shell.
ZIP with both .txt files