OpenVPN Tomato

From BTGuard Wiki
Jump to: navigation, search

openvpn_tomato_1.png

Setup Instructions

1. Connect to http://192.168.1.1/
2. Click on VPN Tunneling > OpenVPN Client > Client 1 > Basic.
3. Fill in the following:

Checkmark Start with WAN
Interface Type: TUN
Protocol: UDP (switch to TCP if UDP doesn't work)
Server Address: vpn.btguard.com, Port: 1194
Firewall: Automatic
Authorization Mode: TLS
Checkmark Username/Password Authentication
Username:
Password:
Both username and password are case sensitive. Make sure not to add/forget Capital Letters.
Leave Username Authen. Only unchecked.
Extra HMAC authorization (tls-auth): Disabled
Checkmark Create NAT on tunnel

4. Hit Save




openvpn_tomato_2.png

5. Got to the Advanced tab.

6.Fill in the following:

Checkmark Redirect Internet traffic
Accept DNS configuration: Strict
Encryption cipher: AES-256-CBC
Compression: Disabled
TLS Renegotiation Time: -1
Connection retry: 30
Leave Verify server certificate (tls-remote) unchecked.
Custom Configuration:
persist-key
persist-tun

7.Hit Save



openvpn_tomato_3.png

8. Go to the Keys tab.

9. Copy the following into Certificate Authority
(Click below to select all)


10. Hit Save then Start Now to connect.