Difference between revisions of "OpenVPN Tomato"

From BTGuard Wiki
Jump to: navigation, search
Line 50: Line 50:
Checkmark '''Redirect Internet traffic'''<br/>
Checkmark '''Redirect Internet traffic'''<br/>
Accept DNS configuration: '''Strict'''<br/>  
Accept DNS configuration: '''Strict'''<br/>  
Encryption cipher: '''BF-CBC'''<br/>
Encryption cipher: '''AES-256-CBC'''<br/>
Compression: '''Disabled'''<br/>
Compression: '''Disabled'''<br/>
TLS Renegotiation Time: '''-1'''<br/>
TLS Renegotiation Time: '''-1'''<br/>

Latest revision as of 21:46, 5 August 2020


Setup Instructions

1. Connect to
2. Click on VPN Tunneling > OpenVPN Client > Client 1 > Basic.
3. Fill in the following:

Checkmark Start with WAN
Interface Type: TUN
Protocol: UDP (switch to TCP if UDP doesn't work)
Server Address: vpn.btguard.com, Port: 1194
Firewall: Automatic
Authorization Mode: TLS
Checkmark Username/Password Authentication
Both username and password are case sensitive. Make sure not to add/forget Capital Letters.
Leave Username Authen. Only unchecked.
Extra HMAC authorization (tls-auth): Disabled
Checkmark Create NAT on tunnel

4. Hit Save


5. Got to the Advanced tab.

6.Fill in the following:

Checkmark Redirect Internet traffic
Accept DNS configuration: Strict
Encryption cipher: AES-256-CBC
Compression: Disabled
TLS Renegotiation Time: -1
Connection retry: 30
Leave Verify server certificate (tls-remote) unchecked.
Custom Configuration:

7.Hit Save


8. Go to the Keys tab.

9. Copy the following into Certificate Authority
(Click below to select all)

10. Hit Save then Start Now to connect.